泥岩颗粒含量对砂泥岩混合料剪切特性的影响
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Influence of mudstone particle content on shear characteristics of sandstone-mudstone particle mixture
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    砂泥岩混合料抗剪特性是影响山区港口工程地基处理的因素。采用直剪仪对不同泥岩颗粒含量、法向应力和含水状态的48组试样进行固结排水慢剪试验,分析泥岩颗粒含量对剪应力-位移曲线形态的影响,揭示其与变形、强度间的关系,并建立抗剪强度的经验计算方法。结果表明,颗粒间接触分为同质颗粒接触和异质颗粒接触两类,在应力集中效应下泥岩颗粒破碎是影响砂泥岩混合料强度及变形的重要因素。砂泥岩混合料应力-应变曲线呈应变硬化,其抗剪强度随泥岩颗粒含量增大而减小。

    Abstract:

    The shear resistance of sandstone-mudstone particle mixture is an influence factor for the foundation treatment of port engineering in mountainous areas. We carry out the direct shearing tests of consolidation drainage to 48 groups of samples with different mudstone particle contents,normal stresses and water bearing states by the direct shear apparatus,analyze the effect of different mudstone particle contents on the form of shear stress displacement-curves,reveal the relationship between deformation and strength,and establish the empirical calculation method of shear strength. The results show that the particle contact can be divided into homogeneous particle contact and heterogeneous particle contact. Under the effect of stress concentration,mudstone particle breakage is an important factor affecting strength and deformation of sandstone-mudstone particle mixture. The stress-strain curve of sandstone-mudstone particle mixture is mainly strain hardening,and its shear strength decreases with the increase of mudstone particle content.

    参考文献
    相似文献
    引证文献
引用本文

李 顺,吴 晓.泥岩颗粒含量对砂泥岩混合料剪切特性的影响[J].水运工程,2021(11):192-197.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2021-11-09
  • 出版日期:
文章二维码