矩形沉箱外壁支座加强短筋伸出长度分析
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Extension length of short stiffener of rectangular caisson outer wall’s support
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对矩形沉箱外壁支座处加强短筋伸出长度的问题,以某重力式沉箱码头项目为实例,采用有限元软件计算沉箱构件实际受力情况,分析支座短筋的伸出长度。计算结果显示,对于部分情况,支座加强短筋伸出支座外的长度大于板净跨的1/4。因此,对于矩形沉箱外壁支座加强短筋的伸出长度,不可简单地取规范规定的最小长度,而应通过进一步计算确定。

    Abstract:

    For the extension length of the short stiffener at the outer wall’s support of the rectangular caisson,we take a gravity caisson pier project as an example and calculate the actual stress of the caisson members using the finite element software,according to which the extension length of the short stiffener of the support is analyzed. The calculation results show that,for some cases,the length of the short stiffener extending out of the support is greater than 1/4 of the clear span of the slab. Therefore,for the extension length of the short stiffener of the rectangular caisson outer wall’s support,the minimum length specified in the code can not be simply taken. It should be determined by further calculation.

    参考文献
    相似文献
    引证文献
引用本文

李雪野,陈际丰,付 超,等.矩形沉箱外壁支座加强短筋伸出长度分析[J].水运工程,2021(10):199-202.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2021-10-12
  • 出版日期:
文章二维码