齿型构件混合堤正交丁坝水流力数值模拟*
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

交通运输部建设科技项目(2014328J17170);国家重大科学仪器开发专项项目(2011YQ070055);国家重点研发计划项目(2016YFC0402307)


The numerically simulation on drag force of the orthogonal spur dike with toothed mixture embankment
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为研究长江南京以下12.5 m深水航道整治工程齿型构件混合堤正交丁坝水流力特性,采用RNG k-ε湍流模型,建立了三维水动力数学模型。通过实测流速、水位以及构件水流力数据进行模型验证,验证结果良好。利用该数学模型对齿型构件混合堤正交丁坝水流力随流速、水深与坝长的变化规律展开研究,对齿型构件混合堤正交丁坝水流力轴线分布规律进行探讨。

    Abstract:

    Using the RNG k-ε turbulence model,this paper established three-dimensional hydrodynamic mathematical model to study on the characteristics of drag force of the orthogonal spur dike with toothed mixture embankment of the 12.5 m deep-water channel regulation phase II project in the Yangtze River under Nanjing.The mathematical model is validated well by the measured data of flow velocity,water level and drag force of tooth structure.The drag force characteristics of the orthogonal spur dike with toothed mixture embankment which varies with the change of flow velocity,water depth and dike length are studied using this model.Moreover,the axis distribution of drag force of the orthogonal spur dike with toothed mixture embankment is discussed.

    参考文献
    相似文献
    引证文献
引用本文

闫杰超,夏云峰,张蔚,等.齿型构件混合堤正交丁坝水流力数值模拟*[J].水运工程,2017(4):1-7.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-04-17
  • 出版日期:
文章二维码