高水头条件下深大型基坑预应力锚索成孔方法及分析
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Hole formation method for the prestressed anchorage cables
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    沙井泵站基坑左右岸支护结构为灌注桩和3层锚索支护体系,整个基坑长220 m,宽68 m,平均开挖深度为11 m,属于深大型基坑,基坑位于软基基础之上,地下水位为1.2~2.5 m,与周围河道连通。主要介绍在高水头条件下,深 大型基坑中锚索的成孔方法,分析锚索在成孔过程中所遇到的冒水和冒砂问题,提出了提高锚索施工平台、提高锚索入射点和增加锚索成孔泥浆密度的方法以解决锚索成孔时冒水和冒砂问题。经过实际施工检验,该方法可行,解决了实际施工问题,成功确保3层锚索顺利成孔。

    Abstract:

    Both sides’supporting structures of Shajing pumping station foundation pit include bored piles and three rows prestressed anchorage cables. The size of the foundation pit is 220 m long and 68 m wide. The average excavation depth of the foundation pit is 11 m, so it’s a large deep foundation pit. The pit is on the soft base, and underground water level is 1.2~2.5 m. This paper mainly introduces the hole formation method of the prestressed anchorage cable in the large deep foundation pit with a high water level, analyzes the issues of water and sand gushing, and proposes the methods including improvement of the construction platform’s level and the position and increment of slurry’s density to solve the problem of water and sand gushing. The methods have been verified by actual construction to be effective and feasible.

    参考文献
    相似文献
    引证文献
引用本文

欧阳麟桦,赵 健,王 俊.高水头条件下深大型基坑预应力锚索成孔方法及分析[J].水运工程,2012(8):177-182.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2012-08-22
  • 出版日期:
文章二维码