基于北斗的国产装备测量精度分析及工程应用*
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划项目(2023YFB2604200)


Measurement accuracy analysis and engineering application of domestic equipment based on BDS-3
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对测量设备国产化替代的迫切需求,基于北斗三号导航定位系统,分别对其静态采集数据和动态RTK采集数据进行研究。采用统计分析方法,结合盐田港东港区工程规划阶段测量进行案例分析。结果表明:基于北斗导航系统的国产化测量装备不仅可满足常规工程的精度要求,还可建立高等级平面控制网。在水运工程测量中具有较高的成本优势,对加快落实北斗系统替代GPS系统具有较好的参考意义,并为类似工程应用提供有益的建议。

    Abstract:

    According to the urgent need for domestic substitution of survey equipment,the static acquisition data and dynamic RTK acquisition data are studied respectively based on the Beidou-3 navigation system.This article adopts statistical analysis methods,combined with the case analysis based with the project planning stage measurement of Yantian East Port.The results show that the domestic survey equipment based on the Beidou navigation system can not only meet the accuracy requirements of conventional engineering,but also establish a high-grade plane control network.It has a high cost advantage in the water transport engineering survey,which has good reference significance for accelerating the implementation of the Beidou Navigation System to replace the GPS,and provides beneficial suggestions for similar engineering applications.

    参考文献
    相似文献
    引证文献
引用本文

孙洪瑞,葛金龙,张登奎.基于北斗的国产装备测量精度分析及工程应用*[J].水运工程,2025(3):264-270.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-03-19
  • 出版日期:
文章二维码