耙腔流场分析与结构优化
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Flow field analysis and structure optimization of drag cavity
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对耙吸挖泥船的耙头在挖掘黏土时,其内部流场情况不明晰的问题,本文对耙腔内部流场进行了仿真计算、分析及优化。采用计算流体动力学(CFD)值模拟计算技术,分析新老耙头的总压差、静压差及截面流速的变化情况。得出设置反弧形导流板后,腔体内部漩涡区域减少,能量损失降低,清水流动性能提高。结果表明:新耙头内部设置流线型腔体,可使流动平顺,输送阻力降低,截面流速趋于合理。其各项性能均优于老耙头。

    Abstract:

    Regarding the problem that the internal flow field of the draghead of the rake suction dredger is not clear when excavating clay,the flow field in the drag cavity is simulated,analyzed and optimized. The change of total pressure difference,static pressure difference and cross section velocity of the new and old dragheads are analyzed by using Computational Fluid Dynamics(CFD)value simulation calculation technique. The results show that the vortex area in the drag cavity is reduced,the energy loss is reduced,and the flow performance of clean water is improved. The conclusions are that the streamlined internal cavity of the new draghead makes the internal flow smooth,the transport resistance is reduced,and the cross section velocity tends to be reasonable. Its performance is better than the old draghead.

    参考文献
    相似文献
    引证文献
引用本文

陈 浩,孙守胜,李章超,等.耙腔流场分析与结构优化[J].水运工程,2023(S2):43-48.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-02-14
  • 出版日期:
文章二维码