基于AQWA的集装箱船舶装卸作业系泊响应分析*
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

浦东新区科技发展基金项目(PKX2019-R12)


Mooring response analysis of ship stevedoring operations based on AQWA
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对集装箱船装卸作业系泊安全问题,基于三维势流理论,利用AQWA软件对系泊集装箱船进行频域水动力分析和时域耦合分析。计算不同装载状态下六自由度响应幅值算子(response amplitude operator,RAO)、时域运动及各风浪流载荷下系缆最大张力;分析不同装载状态对集装箱船六自由度RAO和运动量的影响,评估装卸作业下码头系泊安全。结果表明:1)不同装载状态对横摇运动影响最大;2)满载时集装箱船运动量大于压载工况,系泊缆负载更大。试验结果为评估船舶装卸作业时的系泊安全提供仿真分析依据,对优化码头系泊方案也具有一定的指导价值。

    Abstract:

    Aiming at the mooring safety problem of container ship stevedoring operations,based on the three-dimensional potential flow theory,the AQWA software is used to conduct frequency domain hydrodynamic analysis and time domain coupling analysis for moored container ships. The six-degree-of-freedom response amplitude operator,time-domain motion and the maximum tension of the mooring cable under various wind,wave and current loads under different loading conditions are calculated. The effects of different loading conditions on the six-degree-of-freedom RAO and the amount of movement of the container ship are analyzed. Wharf mooring safety is assessed under stevedoring operations. The results show that:1)Different loading conditions have the greatest impact on rolling motion. 2)When fully loaded,the amount of movement of the container ship is greater than that of ballast conditions,and the mooring cable has a greater load. The test results provide a simulation analysis basis for evaluating the mooring safety of ships during stevedoring operations,and also have certain guiding value for optimizing the mooring scheme of the wharf.

    参考文献
    相似文献
    引证文献
引用本文

肖力旗,曹 民,张柳明.基于AQWA的集装箱船舶装卸作业系泊响应分析*[J].水运工程,2021(11):26-31.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2021-11-09
  • 出版日期:
文章二维码