护岸工程中浅水拖排受力分析与计算
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Analysis and calculation of dragging the soft mattress in shallow water in bank-protection engineering
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对低水位下岸滩裸露高程较高,从岸上牵引施工软体排时受力机理尚不明确的问题,采用分段的方法,将软体排与外部环境之间的接触状态分为贴合、悬空和缠绕3种。在此基础上,推导了贴合状态下静力学模型计算式、悬空状态下悬链线模型计算式和缠绕状态下弧面摩擦模型计算式。分析计算了牵引软体排的最大牵引力,得出计算软体排受力的计算方法。该计算方法可供类似工况下计算软体排受力时参考分析,用于牵引软体排以进行施工方案设计和设备选择。

    Abstract:

    The bank above water is usually high at low water level,and the force state of dragging the soft mattress with concrete interlock blocks to the riverbank of high elevation has not been studied. Aiming at this problem,the contact state between the soft mattress and the external environment is divided into three types by using the method of segmentation:clinging,hanging,and enwinding. The calculation formula of the static model in the clinging state,the calculation formula of the catenary model in the hanging state,and the calculation formula of the cambered surface friction model in the enwinding state are derived. The maximum dragging force of the soft mattress is analyzed and calculated,and the calculation method is obtained. The method can be applied in the analysis of soft mattresses in similar conditions for project design and equipment selection.

    参考文献
    相似文献
    引证文献
引用本文

马文泰,李祥炜,李志朋,等.护岸工程中浅水拖排受力分析与计算[J].水运工程,2021(7):216-220.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2021-07-07
  • 出版日期:
文章二维码