下水式升船机船厢入水过程船池形式*
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划(2016YFC0402002,2016YFC0402006);国家自然科学基金(51479123)


Type of chamber tank for submerge ship chamber ship lift in process of ship chamber falling into water
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过比尺为1:20的船厢出入水物理模型,系统研究船池面积和船厢入水速度对下水式升船机船厢出入水水动力特性的影响。结果表明:船池与船厢面积之差与船厢面积比β的增大可有效降低船厢入水过程船池内水面壅高、船池、引航道内水面最大坡降,改善船池内船厢停泊条件,同时考虑β的增大将引起工程投资的增加,建议船池与船厢间隙面积与船厢面积的最佳比值β为1.24。

    Abstract:

    This paper builds a physical generalized model of submerge ship chamber ship lift with scale of 1:20 to study the impact of chamber tank area and ship chamber’s velocity to hydrodynamic characteristics of the submerge ship chamber ship lift.The results show that the increase of β (ratio of the difference between the area of chamber and chamber tank to the area of chamber)can lower the water surface fluctuation in chamber tank ,the maximum gradient of water surface in approach channel and chamber tank,make mooring conditions of ship chamber better.Considering the project cost increases with β,the recommended β is 1.24.

    参考文献
    相似文献
    引证文献
引用本文

王敬鹏,胡亚安,李中华,等.下水式升船机船厢入水过程船池形式*[J].水运工程,2017(7):22-26.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-07-17
  • 出版日期:
文章二维码