干支流汇合口水力特性的试验性研究
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Experimental research on hydraulic characteristics at confluence of mainstream and branch
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    长江干线河道存在着大量的干支流交汇河段,在此交汇河段,水流运动及河床冲淤特性极其复杂,碍航问题较为严重。利用ADV对弯曲干流型汇合口水流运动特性进行模型试验性研究。研究结果表明,入汇角和汇流比是影响汇合口 区域表面流速及水面比降的主要因素;入汇角的大小是决定漩涡分离区范围的主要因素之一,且随着汇流比和入汇角的增大,漩涡分离区的范围逐渐增大。

    Abstract:

    There are a large number of confluences at the trunk line of the Yangtze River. In these confluences, flow movement and river bed scour and silting characteristics are extremely complex, and the navigation is more serious. Therefore, the ADV is used for bend type confluence to study characteristics of flow movement by model experimental research. Research results show that, the discharge ratio and the inflow angle that is between mainstream and branch are the main factors to effect characters of flow movement.The inflow angle is one of the main factors for determining the separation area of eddies, and the separation area of eddies increase gradually as the inflow angle and the discharge ratio increase.

    参考文献
    相似文献
    引证文献
引用本文

付中敏,谷祖鹏,郑惊涛,等.干支流汇合口水力特性的试验性研究[J].水运工程,2013(4):46-51.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2013-04-20
  • 出版日期:
文章二维码