大水位差框架墩式码头动力仿真分析
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Dynamic simulation for frame-pier in river with large fluctuation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    结合三峡库区某框架墩式码头工程,通过有限元动力仿真方法,利用非线性分析软件ANSYS/LS-DYNA 建立了船舶与独立墩式码头碰撞的有限元模型,模型中考虑了橡胶护弦的缓冲和吸能作用,更加真实地模拟出船-护弦-码头三者 之间的相互作用。模型分析了船舶速度对墩式结构动力响应的影响。

    Abstract:

    Based on the case of Naxigou port in Three Gorge reservoir, taking advantages of the finitedynamic simulation method, we establish the collision model between ship and frame-pier wharf by non-linear analysis software ANSYS/LS-DYNA. In order to simulate the interaction among the ship, the frame-pier wharf and the rubber fender more accurately, we take the cushioning effect and energy absorption of rubber fender into consideration in this model. The influence of various factors are also analyzed.

    参考文献
    相似文献
    引证文献
引用本文

龙丽吉,左旋峰,何光春.大水位差框架墩式码头动力仿真分析[J].水运工程,2012(9):74-79.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2012-09-20
  • 出版日期:
文章二维码